5.2
Display Setting
Click the Display button on the top navigation bar to enter the Display Setting page.
5.2.1
Live
You can configure the live display settings on this page.
Name: Input a camera name. Alphabetic, numeric and Chinese characters are supported.
Signal Format: Select a signal format from 60Hz or 50Hz.
Transparency: Adjust the transparency of the text (time or camera name) overlay displayed on the stream.
Show Name: Switch the button to the right to enable displaying camera name on the stream.
Show Time: Switch the button to the right to enable displaying system time on the stream.
Click Refresh to refresh the page; click Apply to save the settings.
Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
19