Advertisement
Quick Links
Value IP Series Network Camera
Compact-Sized 2MP/5MP/8MP, H265, IR & WDR
This Quick Installation Guide can be applied to the following models:
Series
EBN Series
EZN Series
Copyright © EverFocus Electronics Corp.
Release Date: January, 2019
All the images including product pictures or screen shots in this document are for example only.
The images may vary depending on the product and software version. Information contained in
this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
EBN Series
2MP
EBN1240-A
EZN1240-A
Quick Installation Guide
5MP
EBN1540-A
EZN1540-A
EZN Series
8MP
EBN1840-A / EBN1840-A15
EZN1840-A / EZN1840-A15
Advertisement
Related Manuals for EverFocus EBN Series
Summary of Contents for EverFocus EBN Series
- Page 1 The images may vary depending on the product and software version. Information contained in this document is subject to change without notice. EverFocus Taiwan: 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw...
- Page 2 The models come with 3.6mm lens and IP66 weather-proof housing. The Value IP series conforms to ONVIF for compatibility with other network video devices. Dimensions EBN Series Ø 100mm / 3.94" EZN Series 75.47mm / 2.97" 154.52mm / 6.08"...
- Page 3 Please also keep the shipping carton for possible future use. 2. Contact the shipper if any items appear to have been damaged in the shipping process. Optional Accessory You can go to the product page on EverFocus’ website to check the related optional accessories. www.everfocus.com.tw...
-
Page 4: Installation
3. Installation 3.1 EBN Series 1. Stick the Mounting Sticker on the surface to mark the 3 screw positions. Drill 3 screw-depth holes on the surface and then push the supplied 3 Screw Anchors into the holes. Optionally drill a Cable Hole on the center if you want to run the cables through the surface. - Page 5 4. Screw the Camera Base to the surface using the supplied 3 Screws. 5. Place the camera body back to the Camera Base and twist back the Outer Housing. Do not twist the Outer Housing too tight as you will have to adjust camera angles while viewing camera live view.
- Page 6 Orange with white stripe Orange Green with white stripe Blue Blue with white stripe Green Brown with white stripe Brown 7. Connect the camera to power. You can either connect the camera to a 12VDC power source or to a PoE switch using the PoE cable. 8.
- Page 7 Stopper Screw Cap Waterproof Ring Cable Gland b. Connect the RJ-45 cable to the LAN/PoE Cable of the camera. RJ-45 Cable LAN/PoE Cable c. Tightly screw the Cable Gland and Screw Cap to the Rugged RJ-45 Connector Cable. Screw Cap Cable Gland d.
- Page 8 4. Accessing the Camera You can look up the IP address of the IP camera using the IP Utility (IPU) program, which is included in the software CD. The default IP mode of the IP camera is DHCP. However, if there is no dynamic IP address assigned to the device, its IP will switch to 192.168.0.10 By default, the ID is admin and there is no password.