Ip Filter - EverFocus EZN Series User Manual

5.5.5

IP Filter

You can configure the IP Filter settings on this page. This function allows you to allow or deny some specific IP
address to access the IP Camera. By default, all IP addresses are allowed to access the camera.
To set up IP filtering:
1. From the Filter Mode drop-down list, select a filter mode. You can only activate one mode for the IP camera:
Allow all IP connections: Select this mode to allow all IP addresses to access the IP camera. Click the
•
Apply button to save the settings.
Allow the checked IP connections only: Select this mode to allow only some specific IP addresses to
•
access the IP camera. Click the Add button to add the IP addresses and then check the Enable box. Click
the Apply button to save the settings.
Deny the checked IP connections only: Select this mode to deny only some specific IP addresses to
•
access the IP camera. Click the Add button to add the IP addresses and then check the Enable box. Click
the Apply button to save the settings.
2. If you want to delete the IP addresses from the list, click on the column of the IP address, the column will be
highlighted with a blue background, and then click the Delete button.
Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
37