I/O - EverFocus EZN Series User Manual

Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
5.4.2

I/O

After connecting the external I/O devices to the camera, you can configure the I/O settings on this page.
Alarm Type: Select an alarm type for the alarm input. Options include Normally-Open, Normally-Close and Off.
Timeout Duration: After enabling the Alarm Out, select a timeout duration for the alarm output.
Send Email: Switch the button to the right to enable the Email alert function. When an I/O alarm is triggered,
the camera will send an email alert with a snapshot image to the pre-configured Email receiver. Note that for
this function to work, you have to set up the Email function in advance (refer to 5.5.3 Email).
Alarm Out: Switch the button to the right to enable the alarm output, and then further configure the Timeout
Duration above.
Send to Cloud: Switch the button to the right to enable the camera to automatically send the I/O alarm
snapshot images to the associated Dropbox. Note that for this function to work, you have to set up the Cloud
Storage function in advance (refer to 5.6.2 Cloud Storage).
Send to FTP: Switch the button to the right to enable the FTP function. When an I/O alarm is triggered, the
camera will upload alarm images to FTP server. Note that for this function to work, you have to set up FTP in
advance, please refer to 5.5.7 FTP.
Enable Recording: Switch the button to the right to enable the I/O alarm recording function. Note that for /O
alarm recording to work, the Record Schedule function has to be configured (please refer to 5.3.2 Record
Schedule).
Post Recording: Select a post recording time when an I/O alarm is triggered.
Click Refresh to refresh the page; click Apply to save the settings.
29