5.5.7
FTP
You can configure the FTP settings on this page. When an alarm is triggered, the IP Camera will send an instant
snapshot image to the FTP.
FTP Enable: Switch the button to the right to enable the function.
Server: Input the FTP server IP.
Port: Keep the port 21.
Username: Input the user name of the FTP server.
Password: Input the password of the FTP server.
Send Images: Switch the button to the right to enable the function.
Click Refresh to refresh the page; click Apply to save the settings.
Note: For the FTP function to work, after configuring the FTP settings, you will have to enable the
Send to FTP function on the Motion (see 5.4.1 Motion) and I/O (see 5.4.2 I/O) alarm setup page.
Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
39