Https; Ip Filter - EverFocus H265 Series User Manual

3.6.6 HTTPS

You can configure the HTTPS settings on this page. Switch the HTTPS button to the right to enable the
function. Input a port number if necessary (default 443). Select an HTTPS Type and then click the Save
button.

3.6.7 IP Filter

You can configure the IP Filter settings on this page. This function allows you to allow or deny some
specific IP address to access the IP Camera. By default, all IP addresses are allowed to access the
camera.
To set up IP Filter:
1. Check the Enable box and then select either one from the two options below. You can only
activate one option for the IP camera.
a. Whitelist: Enable the whitelist configured below.
b. Blacklist: Enable the blacklist configured below.
2. Edit the Whitelist or Blacklist.
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
66