Position of the hook and needle
7.5 Adjusting the needle guide
Proper setting
Machine is locked in place at position 1 ( p. 25).
The needle guard pushes the needle just enough away so that it
Fig. 23: Adjusting the needle guide (1)
(1) - Needle guide
To adjust the needle guide:
1. To adjust the needle guide (1), turn the screw (2).
Fig. 24: Adjusting the needle guide (2)
2. Use a sheet of paper to check the distance between needle and needle
3. The space between needle and needle guide (1) must just be wide
Service Instructions 911-210-10 - 00.0 - 06/2020
cannot be touched by the hook tip.
• To move the needle guide closer to the needle: Turn screw (2)
clockwise
• To move the needle guide further away from the needle: Turn
screw (2) counterclockwise
guide (1) and adjust it if necessary.
enough to allow a sheet of paper to pass through.
①
②
(2) - Screw
37