Table of Contents
Advertisement
Connecting External Devices
Connecting the Signal Tower
You can connect the signal tower to this machine . The signal tower must be prepared by the user separately .
WARNING Perform this work with all power switches left switched off .
Failure to observe this instruction may cause the machine to move suddenly, resulting in injury .
Procedure
1.
Check that the machine's main power and sub power switches are off .
2.
Remove the two caps (1) and the one screw (2) shown in the following figure .
3.
Attach the signal tower to the position shown in the figure .
M8 type × 2
4.
Connect the signal tower wires to the signal tower connectors .
While pressing (1) with the included tweezers, insert the signal tower wire . For details on the output
specifications, refer to "Signal Tower Connector" (p . 92) .
38
Chapter 1 Fully Utilizing the Machine
20 mm
(0 .8 in .)
Signal tower
connector
Signal tower wire
Advertisement
Table of Contents
