Table of Contents
Advertisement
Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be
sure to read through this manual completely and store it in a safe location.
• Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
• The contents of this manual and the specifications of this product are subject to change without notice.
• The manual and the product have been prepared and tested as much as possible. If you find any
misprints or errors, please inform Roland DG Corp.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur
through use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur with
respect to any article made using this product.
This system (including the housing and safety device) is a Class 1 laser product.
Complies with IEC 60825-1 Edition 2.0 (2007-03).
Complies with FDA performance standards for laser products except for deviations pursuant to Laser
notice No.50 dated June 24, 2007.
Caution - Use of controls or adjustments or performance of procedures other than those specified
herein may result in radiation exposure.
This product uses GNU General Public License (GPL)/GNU Lesser General Public License (LGPL) software.
You have the right to acquire, modify, and distribute the source code for this GPL/LGPL software. You
can obtain the GPL/LGPL source code used in this product by downloading it from the Roland DG Corp.
website. See the following URL for details on the basic method for acquiring the source code.
URL: http://www.rolanddg.com/gpl/
Roland DG Corporation has licensed the MMP technology from the TPL Group.
Advertisement
Table of Contents
