Table of Contents
Advertisement
Step 7: Connecting the Cables
Procedure
A
Insert the cable clamp.
B
Connect both the power cord and the Ethernet cable (commercially available).
Use a power plug adapter if the electrical outlet is a two-prong outlet.
WARNING
WARNING
WARNING
Ethernet cable
(Category 5 or higher)
Perform this task with all power switches left switched off.
Sudden movement of the machine may cause injury.
Connect to an electrical outlet that complies with this machine's ratings (for
voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect the machine to ground.
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.
Cable clamp
Pass the Ethernet
cable and the power
cord through here.
Ethernet
(1000BASE-T recommended)
Power cord
1. Assembly and Ink Filling
2.Installation
43
Advertisement
Table of Contents
