Connecting The Cables; Connecting The Power Cable And The Network Cable - Roland SOLJET Pro 4 XF-640 Setup Manual

4. Connecting the Cables

Connecting the Power Cable and the Network Cable

WARNING
WARNING
WARNING
Ethernet cable
(Category 5 or higher)
Never insert
a telephone
cable.
Connect to electrical outlet that complies with this machine's ratings (for
voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Ethernet
(100 Base-TX recommended)
Cable clamp
Pass the cables through here.
Electrical outlet
Power cord
Insert the cable
clamp.
Ethernet cable
Power cord
31