Mitsubishi MELSEC Q Series Reference Manual page 358

3 - 298
3 WHEN COMMUNICATING USING THE QnA COMPATIBLE 3E/3C/4C FRAMES OR 4E FRAME
REMARKS
For the target of the remote password check function when a CPU module with built-
in Ethernet port is used, refer to the following.
• QnUCPU User's Manual (Communication via Built-in Ethernet Port)
• MELSEC-L CPU Module User's Manual (Built-in Ethernet Function)
(2) Control procedure
The control procedure when a remote password is set in the Q/LCPU for the
station where the C24/E71 is loaded is shown below.
(a) Accessing via the E71 or the built-in Ethernet port of the CPU module
REMARKS
For the control procedure when a CPU module with built-in Ethernet port is used,
refer to the following.
• QnUCPU User's Manual (Communication via Built-in Ethernet Port)
• MELSEC-L CPU Module User's Manual (Built-in Ethernet Function)
3- 298