Cpu Model Name Read (Command: 0101) - Mitsubishi MELSEC Q Series Reference Manual

3.6.7 CPU model name read (command: 0101)

[Control procedure]
(Data name)
External device
side
(Example)
(Data name)
Programmable controller CPU side
(Example)
3 - 151
3 WHEN COMMUNICATING USING THE QnA COMPATIBLE 3E/3C/4C FRAMES OR 4E FRAME
The examples shown in this section explain the control procedure for reading the
model name of the programmable controller CPU.
The order and content of data items of the areas marked by " " shown in the control
procedure diagram differ depending on the module used as well as the frame and
format used for communication.
Refer to the detailed information described in Section 3.1.
(1) Data communication in ASCII code
(Refer to Section 3.6.1.)
H - - L H - -
0 1 0 1 0 0 0
30 31 30 31 30 30 30 30
H H H H H H H
(2) Data communication in binary code
(Refer to Section 3.6.1.)
(Data name)
External device
side L H L H
(Example)
01 01 00 00
H H H H
(Data name)
Programmable controller CPU side
(Example)
L
0
(Refer to Section 3.6.1.)
H
H - - - - - - - -
Q 0 2 H C P U
51 30 32 48 43 50 55 20 20
H H H H H H H H
(Refer to Section 3.6.1.)
H - - - - - - - - - -
Q 0 2 H C P U
51 30 32 48 43 50 55 20 20 20 20
H H H H H H H H H H
- - - - - - L H - - L
0 0 4 1
20 20 20 20 20 20 20 30 30 34 31
H H H H H H H H H H H H
- - - - L L H
20 20 20 20 20 41 00
H H H H H H H H
3 - 151