Mitsubishi MELSEC Q Series Reference Manual page 124

External
device side
Programmable controller CPU side
External
device side
Programmable controller CPU side
3 - 64
3 WHEN COMMUNICATING USING THE QnA COMPATIBLE 3E/3C/4C FRAMES OR 4E FRAME
(a) Data in the character areas when communicating in ASCII code
The data order and contents of character areas A, B, and C are identical
when the same command is used under the same conditions in the control
procedure when communicating using ASCII code.
(Example)
Reading data
Character area A
H – – L H – – – – L H
Character area C
H L H – – – – L H
– –
The data arrangement and content of the area marked with " " are
shown in Section 3.1.
Character area B
– – L
L
– –
3 - 64