Mitsubishi MELSEC Q Series Reference Manual page 267

Fixed to 0000
H
(Data name)
External device
side
L H L
(Example)
01 02 00
H H H
0201
H
(Data name)
Programmable
controller CPU
side L H L
1F 00 02
H H H
(Example)
3 - 207
3 WHEN COMMUNICATING USING THE QnA COMPATIBLE 3E/3C/4C FRAMES OR 4E FRAME
(b) Reading file information for two files from memory card A (RAM area, drive
name: 01
H
Keyword valid
Memory card A
(Refer to Section 3.7.1.) (Refer to Section 3.8.1.)
H L - H L H L H L H
00 01 00 20 01 01 00 0A 00 02 00
H H H H H H H H H H H
(Refer to Section 3.8.1.)
File information 1 (Information of file No. 10)
Filename with extension
H - - - - - - L
H L H H -
A B C D 1 2 _ _ Q P
00 0A 00 41 42 43 44 31 32 20 20 51 50 47
H H H H H H H H H H H H H
20 hours 50 minutes
000A
H
58 seconds
POINT
(1) Designate the following items within the following ranges indicated below. The
values for these items will also be returned within the following ranges.
• Head file number
• Number of file requested
• Total number of registered files
• Number of file information
(2) The total number of registered files is the current total number of files
registered in the designated drive.
(3) When all the files are not registered within the designated file number range,
the number of file information becomes the number of files registered in the
designated range (Return number of file information).
) file number 10 (A ) while communicating in binary code.
H
L
L H L H L - - H
G
20 5D A6 28 20 00 1C 00 00
H H H H H H H H H H
January 8, 1996
0B
000B
File information 2 (Information of file No. 11)
Filename with extension
L H H - - - - - - L H - L
E F G H 5 _ _ _
Q P G
00 45 46 47 48 35 20 20 20 51 50 47 20
H H H H H H H H H H H H H H
11 hours 30 minutes
H
00 seconds
: 1  file number  256
: 1  file number  36
: 1  number of files  256
: 0  file count  number of file
requested (0: No registered files after
the designated head file number)
L H L H L - - H
C0 5B 82 21 C8 13 00 00
H
H H H H H H H
December 2, 1996
3- 207