Mitsubishi MELSEC Q Series Reference Manual page 232

b15 – – – – –
0 0 0 0 0 0
3 - 172
3 WHEN COMMUNICATING USING THE QnA COMPATIBLE 3E/3C/4C FRAMES OR 4E FRAME
• Changing the file information in batch (command: 1204;
subcommand: 0002)
– – – – b5 b4 b3 b2 b1 b0
0 0 0 0 1/0 1/0 1/0 1/0 1/0 1/0
...... Can be designated between 01
File name and extension modification yes/no designation
0: Do not modify the file name and extension
1: Modify the file name and extension
File attribute modification yes/no designation
0: Do not modify the attribute
1: Modify the attribute
Last update time modification yes/no designation
0: Do not modify the last update time
1: Modify last the update time
Last update date modification yes/no designation
0: Do not modify the last update date
1: Modify last the update date
Modification mode for data and time designation
Designate which of the following data should be used
when changing date and time.
0: Use date and time in a message
1: Use data and time of the QnACPU
(Designate dummy date and time for the message)
File size modification yes/no designation
0: Do not modify the file size
1: Modify the file size
to 3F .
H H
3 - 172