4-2 HOW TO UPGRADE/INSTALL FIRMWARE
It is necessary to prepare the followings to upgrade/install the firmware.
1.Firmware file
2.WindowsPC (Network port is required.)
3.Peck.exe
4.Network cable (A cross cable is required when you connect XJ-740/640/540 to PC directly.)
HOW TO UPGRADE FIRMWARE (Referential Time : 5 min)
Check the IP address of XJ-740/640/540.
1
Turn on the Main Power SW and Sub Power SW, then
press [MENU] key.
Select [SYSTEM INFO.] > [NETWORK] > [IP ADDRESS].
Turn off the Sub Power SW.
2
MENU
SYSTEM INFO.
SYSTEM INFO.
NETWORK
NETWORK
IP ADDRESS
IP ADDRESS
192.168.000.003
4-16
MENU
[ ]
[ ]
[ ]
[ ]
[ ]