Take-Up Board Replacement - Roland SOLJET PRO III XJ-540 Service Notes

3-12 TAKE-UP BOARD REPLACEMENT

Turn off the Sub Power SW and Main Power SW of the
1
machine, and turn off the SW of the Take-up unit.
Remove the TU Cover.
Remove the 2 screws as shown in the figure to remove
2
the Plate fixing the Board.
Remove all the cables that are connected to the Board.
3
Remove the 4 screws to remove the Board from the
4
Plate.
Replace with the new Board.
Board
Plate
Shaft
3-59
TU Cover
Screw