Clearing Paper Jams; Clearing Paper Jams From Tray 1, Tray 2, Tray 3 Or Tray 4 - Xerox WorkCentre 7120 User Manual

Troubleshooting

Clearing Paper Jams

When a jam occurs, the control panel touch screen displays an animated graphic showing the location
of the jam.
This section includes:
•

Clearing Paper Jams from Tray 1, Tray 2, Tray 3 or Tray 4

• Clearing Paper Jams from Tray 5 (Bypass Tray)
• Clearing Paper Jams in Document Feeder
• Clearing Paper Jams in Cover A
• Clearing Paper Jams in Cover B
• Clearing Paper Jams in Cover C
• Clearing Paper Jams in Duplex Module D
• Clearing Paper Jams in Cover E
• Clearing Paper Jams in Integrated Office Finisher
• Clearing Paper Jams in Office Finisher LX
• Clearing Hole Punch Jams in Office Finisher LX
• Troubleshooting Paper Jams
To avoid damage, always remove misfed media gently, without tearing it. Try to remove the paper in the
direction that the paper would normally feed. Any piece of media left in the printer, whether large or
small, can obstruct the media path and cause further misfeeds. Do not reload media that has misfed.
Note: The printed side of jammed pages may smudge, and the toner may stick to your hands. Do
not touch the printed side of the media when removing it. Make sure not to spill any toner inside
the printer.
WARNING: If you accidentally get toner on your clothes, lightly dust them off as best as you can.
If some toner remains on your clothes, use cool, not hot water, to rinse the toner off. If toner gets
on your skin, wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out
immediately with cool water and consult a doctor.
Clearing Paper Jams from Tray 1, Tray 2, Tray 3 or Tray 4
1. Pull the tray out toward you until it stops.
180 WorkCentre 7120 Multifunction Printer
User Guide
on page 181
on page 182
on page 184
on page 185
on page 186
on page 187
on page 188
on page 189
on page 190
on page 191
on page 193
on page 180
wc7120-079