Setting Of The Resolver - Parker NK Series Technical Manual

4.3.2. Setting of the resolver

At the time of the procedure of setting, it is imperative to observe the 3 following
conditions:
• The motor rotor must be free in rotation. The torque of maximum friction on the
rotor should not exceed 1 % of torque permanent motor.
• The coolant cooling system must be under operation.
• The operator must have access to the resolver stator and be able to turn it
manually and then lock it in place (with lock screw).
To refer to the drive manuals, for the details of the setting procedure.
94 - PVD 3664_GB_NK-November 2016.Docx