How To Select The Data Source; Advanced Settings Window - Furuno FAR-3210 Instruction Manual

Menu item
Layout
Conning layout sheet and usable monitor
Layout Sheet
Conning (3x6)
Wide Conning (4x6)
Side Conning (1x9)
Mini Conning (1x5)
1.15.1

How to select the data source

Click
dow (see section 1.15.2.) to display the
[Data Source Select] window. Select the
data source in the [Data Source Select]
window to show the respective data on the
conning display.
• [Selected Data Source]: This is auto-
matically generated when [Type],
[Source] and [Decoder] are selected.
• [Type]: Select the data source type.
Setting
[Digital]
[Analog]
[NMEA]
[Own Ship] Displays Own Ship data received from own ship management program.
• [Source]: Select the sensor from which the data will be sourced.
• [Decoder]: Select which data from the source sensor to use.
1.15.2

Advanced settings window

Note: Do not use the following components:
• CommonMP
• Fore & AFT bridge (Wide) U10662/
10683/10782/1340
• Motion Sensor
• Steering Mode for GSI
You can configure the layout and data to show on the conning
display. Drag and drop the components to configure the layout.
Click to delete a component from the [Layout] window. To
select the data source for a component, click
the advanced settings window. See the procedure on
section 1.15.1.
MU-190, MU-231, MU-201 CE, MU-231CE, JH19T14FUD,
JH20T17FUD, JH23T12FUD, JH23T14FUD, HD19T21MMD
MU-270W, JH26T11MMD, HD26T21MMD
MU-270W, JH26T11MMD, HD26T21MMD
Available with any monitor.
on the advanced settings win-
Displays contact input data.
Displays analog input data.
Displays data received directly from NMEA device.
1. INITIAL SETTING AND ADJUSTMENT
Explanation
Monitor
Description
• Fore & AFT bridge (Wide) Havyard122
• Fore & AFT bridge (Wide) NB802/818/
830/832/857
• Nav. Information For GSI
to display
1-57