Furuno FAR-3210 Instruction Manual page 95
Setting and adjustment
Hide thumbs
Also See for FAR-3210:
- Operator's manual (463 pages) ,
- Installation manual (245 pages) ,
- Instruction manual (97 pages)
Table of Contents
Advertisement
17. Enter "write" in the [Switch#], then press the Enter key. Reboot the HUB-3000 af-
ter performing "write" to enable the querier function of HUB-3000.
Switch# config
Switch_config# ip igmp-snooping querier
Switch_config# show ip igmp-snooping
Global IGMP snooping configuration:
-----------------------------------
Globally enable
VLAN nodes
Dlf-frames filtering : Enabled
Sensitive
Querier
Querier address
Router age
Response time
Switch_config# write
Saving current configuration...
OK!
18. Reboot the HUB-3000.
19. Repeat step 6 to step 11 then confirm "Enabled" in the [Querier]. For "Disabled"
is shown, redo the IGMP querier setting.
: Enabled
: 1
: Disabled
: Enabled
: 10.0.0.200
: 260 s
: 15 s
3. HUB-3000 IGMP Querier
3-3
Hide quick links:
Advertisement
Table of Contents
