Furuno FAR-3210 Instruction Manual page 80

1. INITIAL SETTING AND ADJUSTMENT
• [Wind Direction]
[Title]: Enter the title of the component.
[Location]: Select the reference point for the wind direction and speed from the pull-
down list.
[Theoretical]
[Label]: Enter the data name for the theoretical wind direction and speed.
[Source]: Select the data source of the theoretical wind direction and speed.
[Apparent]
[Label]: Enter the data name for the apparent wind direction and speed.
[Source]: Select the data source of the apparent wind direction and speed.
[Unit]: Set the unit of the wind direction and wind speed.
[Decimal Place]: Check the checkbox to show the value after decimal point.
[Large] component (three or more blocks)
• Alert
• Doppler Log
[Title]: Enter the title of the component.
[SOG Longitudinal Speed]: Select the data source of the longitudinal SOG.
1-74