Hill Start Control
Reading
The 1 symbol for the drive-
off assistant is displayed in the
Pure Ride view and in the top
status line.
Operate Hill Start Control
Requirement
The vehicle is at a standstill.
ATTENTION
Failure of the drive-off as-
sistant
Risk of accident
Secure the vehicle by braking
manually.
NOTICE
Hill Start Control is purely a com-
fort system to facilitate holding
the machine and pulling way
on uphill gradients and should
not be confused with a parking
brake.
Operate the brake lever 1 or
footbrake lever strongly and
release again quickly.
Green holding symbol is
displayed.
Hill Start Control has been ac-
tivated.
To switch off Hill Start Control,
operate the brake lever 1 or
footbrake lever again.
The holding symbol disap-
pears.
Alternatively, ride off in 1st or
2nd gear.
NOTICE
When riding off, Hill Start Control
is automatically deactivated.
Once the brake has been
fully released, the holding
symbol disappears.
Hill Start Control is deactivated.
See the "Engineering details"
section for more information on
Hill Start Control:
4
73
z