BMW S 1000RR Rider's Manual page 161

Reversing the shift
pattern
ATTENTION
Riding with shift pattern re-
versal on public roads
Voiding of homologation for rid-
ing on public roads
Do not install the gearshift-pat-
tern reverser for riding on pub-
lic roads.
Clean the thread 1.
Pull off protective cap 2 and
slide on the gearshift rod 4.
Remove bolt 3 with washer.
Transfer the gearshift rod 4
to the thread for the inverted
gearshift pattern 1.
Insert bolt 1 through ball joint 2
and washer 3.
Install bolt 1 in thread for inver-
ted gearshift pattern 4.
Selector rod to gearshift
lever
Thread-locking compound:
Micro-encapsulated
8 Nm
Push on protective cap 5.
The gearshift-pattern reverser
for racing is set up.
8
159
z