Chain - BMW S 1000RR Rider's Manual

Remove tail-hump cover
( 79).
Press locks 1.
Release diagnostic connector 2
from bracket 3.
The interface to the diagnosis
and information system can be
connected to the diagnostic
connector 2.
Securing the diagnostic
connector
Disconnect interface for dia-
gnosis and information system.
Insert the diagnostic
connector 2 into the bracket 3.
The locks 1 engage.
with two-up riding package
Install the rear seat (
Installing tail-hump cover
( 80).

Chain

Lubricating chain
ATTENTION
Inadequate cleaning and lub-
rication of the drive chain
Accelerated wear
Clean and lubricate the drive
chain at regular intervals.
Lubricate the drive chain every
800 km at the latest. Lubricate
the chain more frequently if
the motorcycle is ridden in wet,
dusty or dirty conditions.
Switch the ignition off and se-
lect neutral.
Clean the drive chain with a
suitable cleaning product, dry it
and apply chain lubricant.
OE
To prolong chain life,
80).
BMW Motorrad recommends
the use of BMW Motorrad
chain lubricant, or:
Lubricant
Chain spray
Wipe off excess lubricant.
10
207
z