BMW S 1000RR Rider's Manual page 201

Remove screws 1 and 2.
Unclip left and right rear trim
panels carefully in the direc-
tion of arrow.
Carefully unclip left and right
rear trim panel 1, first horizont-
ally 2, then vertically 3.
Push the rider's seat cover 1
forward slightly on the seat
cushion surface and expose
tab 2.
Remove bolt 3.
Lift up the rider's seat 1 at the
rear and unhook fixing 4.
Place the seat, upholstered
side down, on a clean surface.
Remove bolts 1 and 3 from
tail-hump trim panel 2.
Carefully unclip panels 4 in
the direction of arrow.
10
199
z