Insert rider's seat 1 into the fix-
ing 4 at the front and position
it.
Push the rider's seat cover 1
forward slightly on the seat
cushion surface and expose
tab 2.
Position and install bolt 3.
Carefully clip in left and right
rear trim panel 1, first vertic-
ally 2, then horizontally 3.
Carefully clip in rear trim panel
in the direction of arrow.
Install bolts 1 and 2.
with two-up riding package
Install the rear seat (
Installing tail-hump cover
(
80).
Jump-starting
CAUTION
Touching live parts of the ig-
nition system when the en-
gine is running
Electric shock
Do not touch parts of the igni-
tion system when the engine is
running.
ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
OE
10
80).
201
z