BMW S 1000RR Rider's Manual page 186

10
WARNING
Brake-pad thickness less
184
than permissible minimum
Diminished braking effect, dam-
age to the brakes
In order to ensure the depend-
ability of the brake system, do
not permit the brake pads to
wear past the minimum per-
missible thickness.
Have the brake pads replaced
by a specialist workshop,
z
preferably an authorised
BMW Motorrad Retailer.
Checking brake-fluid
level, front brakes
Make sure the ground is level
and firm and hold the motor-
cycle upright.
Move the handlebars to the
straight-ahead position.
Check brake fluid level on the
brake fluid expansion tank 1.
NOTICE
Wear of the brake pads causes
the brake fluid level in the reser-
voir to sink.
Brake fluid level, front
Brake fluid, DOT4
The brake fluid level must
not fall below the MIN mark.
(Brake-fluid reservoir, hori-
zontal)
If the brake fluid level drops be-
low the permitted level: