BMW S 1000RR Rider's Manual page 53

Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad Retailer.
Possible cause:
Plug connection disconnected.
Connect disconnected plug
connection. ( 157)
Side stand monitoring is
faulty
Side stand monitor-
ing faulty. Onward
journey possible. Engine
stop. when stationary!
Have checked by workshop.
Possible cause:
The side-stand switch or its wir-
ing are damaged.
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad Retailer.
ABS self-diagnosis not
completed
ABS indicator and warning
light flashes.
Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS deactivated
ABS indicator and warning
light comes on.
Possible cause:
The rider has switched off the
ABS system.
Activating the ABS function
( 156).
ABS fault
ABS indicator and warning
light comes on.
Limited ABS availab-
ility! Riding at mod.
speed pos. Ride carefully
to next specialist work-
shop.
Possible cause:
The ABS control unit has
detected a fault. The partially
integral function and the
Dynamic Brake Control function
have failed. The ABS function
has limited availability.
You can continue to ride. Take
note of the more detailed in-
formation on certain situations
3
51
z