BMW S 1000RR Rider's Manual page 154

Disconnect connector for num-
8
ber plate light 2 and left turn
indicator 3.
152
NOTICE
If the number-plate carrier is re-
moved in preparation for a race-
track session, the electronics de-
tect a bulb failure and the ap-
propriate warning appears on
the display. Deactivating the
Light warnings function in the
RACETRACK CONFIGURATION
menu suppresses this warning
message.
z
Disconnect connector for right
turn indicator 1.
Feed out cable for right turn
indicator 1, left turn indicator 2
and number plate light 3.
Remove screws 1.
Unhook number plate carrier 1
and remove downwards.
Carefully thread out cable.