BMW S 1000RR Rider's Manual page 193

Disengage the cable for the
wheel speed sensor from hold-
ing clips 1 and 2.
Remove bolt 4 and remove the
wheel speed sensor from its
bore hole.
ATTENTION
Unwanted inward movement
of the brake pads
Component damage on attempt
to install the brake caliper or be-
cause brake pads have to be
forced apart
Do not operate the brakes with
a brake caliper not correctly
secured.
Remove mounting bolts 3 of
the left and right brake calipers.
Force the brake pads 1 slightly
apart by rotational movement
of the brake caliper 2 against
brake disc 3.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
Lift the front of the motorcycle
until the front wheel is clear of
the ground, preferably using
a BMW Motorrad front-wheel
stand.
Installing auxiliary stand at front
wheel ( 177).
ATTENTION
Incorrect gap between
sensor ring and wheel speed
sensor due to misaligned
threaded bush in front
suspension
10
191
z