3
without Dynamic Damp-
ing Control (DDC)
Adjusting rebound-stage
damping for rear wheel
(
113).
without Dynamic Damp-
ing Control (DDC)
Adjusting compression-
stage damping for rear
wheel (
113).
4
Replacement fuses
7.5 A
15 A
5
Plastic cap
Adjusting spring preload
for front wheel (
6
Torx wrench, T30
Removing and installing
trim panel components.
Front-wheel stand
OE
Installing auxiliary stand
at front wheel
ATTENTION
OE
Use of the BMW Motorrad
front wheel stand without ac-
companying use of centre
stand or auxiliary stand
Risk of damage to parts if vehicle
topples
Place the motorcycle on its
centre stand or another auxili-
ary stand before lifting the front
wheel with the BMW Motorrad
108).
front-wheel stand.
Place the motorcycle
on an auxiliary stand;
BMW Motorrad recommends
the BMW Motorrad auxiliary
stand.
Installing the rear-wheel stand
(
178).
Use basic stand (83 30 0 402
241) with the adapters (83 30
2 152 839).
Insert service adapter (83 30
2 152 840) 1 into the front
suspension on left and right.
10
177
z