BMW S 1000RR Rider's Manual page 198

an authorised BMW Motorrad
10
dealer.
196
Roll rear wheel on the support
into the swinging arm.
z
Insert brake caliper 1 with
brake-caliper support 2 into the
guide 3 of the swinging arm.
NOTICE
Ensure correct position of brake
line and ABS sensor cable. The
brake line and the ABS sensor
cable must sit in their guides in
order to prevent contact with the
rear wheel or exhaust system.
Roll the rear wheel as far
forward as possible and
loop chain 1 over the chain
sprocket.
Install adjustment plate on the
right 1 in the swinging arm.