Programming
5.10 Resetting the counter
Depending on the machine parameter settings, the counter counts the sewn
programs or sequences up or down. You can use the
(Reset Counter)
( p. 72).
To reset the counter:
1. Tap the button Zähler-Reset (Reset Counter)
The counter is reset to the value defined in the machine parameters.
5.11 Creating a new seam program
New seam programs are created using a Teach-In procedure.
Individual seam paths with specific seam parameters are defined via the
operating terminal in order to do this.
To create a new seam program:
1. Tap the menu items
The Teach-In window appears.
Fig. 35: Creating a new seam program
(1) - Cursor position
(2) - Cursor
(3) - Arrow buttons
(4) - OK button: Übernahme (Accept)
Operating Instructions 911-210 - 04.0 - 11/2016
button to reset the counter to the start value
screen.
Datei (File)
programm (Seam Program)
①
②
③
Zähler-Reset
Neu (New)
>
.
(5) - Speichern (Save) button
(6) - Löschen (Delete) button
(7) - Parameter button
(8) - Linienauswahl (Line selection) button
on the start
Naht-
>
⑧
⑦
⑥
⑤
④
49