Table of Contents
Advertisement
Programming
16.10 Seam programs and seam sequences
16.10.1 Creating a new seam program
New seam programs are created using a Teach-In procedure.
Individual seam paths with specific sewing parameters are defined via
the control panel in order to do this.
To create a new seam program:
1. Press the menu items
The Teach-In window appears.
Fig. 75: Creating a new seam program
(1) - Cursor position
(2) - Cursor
(3) - Arrow buttons
(4) - OK button: Accept
Defining the starting point
2. Define the starting point:
Method
Using the arrow buttons (3)
Caution
For safety reasons, you cannot use the arrow buttons (3)
to select a position beyond 90.1 or -92.6 on the Y-axis.
Settings beyond these coordinates require that you use
the pedal.
Using the pedal
Every press of the pedal moves the cursor (2) by 0.1 in
the direction of the selected axis (X or Y)
Entering coordinates directly via the cursor position (1)
Service Instructions 911-210-10 - 00.0 - 06/2020
Nahtprogramm (Seam Program)
①
②
③
Datei (File)
>
.
(5) - Save button
(6) - Delete button
(7) - Parameter button
(8) - Line selection buttons
Neu (New)
>
⑧
⑦
⑥
⑤
④
Coordinate area
X -150 to X 230
Y 90.1 to Y -92.6
X -150 to X 230
Y 100 to Y -100
X -150 to X 230
Y 100 to Y -100
89
Advertisement
Table of Contents
