Table of Contents
Advertisement
4.4.4
View Functions
Select 7) View from the Main Menu to enter the View Menu. This menu displays information about the selected option
on the alphanumeric display. After viewing an option, press the [No] key to return to the View Menu. Press the [No] key
again to return to the Main Menu.
4.4.4.1 View Devices
This option allows the operator to view the current state and text of any device on a circuit.
Select 1) Devices from the View Menu.
The display will prompt for the loop (circuit) number. Key in the circuit number and press [Enter].
The display will then prompt for the address. Key in the address and press [Enter].
4.4.4.2 View Event Log
This option allows the operator to view the Event Log.
Select 2) Log from the View Menu and press [Enter].
The display prompts a beginning entry number. The default is the latest entry. Press [Yes] to accept the prompt.
Press [No] to select another entry. Use the [<] [>] keys to scroll through the log.
Exit this menu by pressing the [No] key.
4.4.4.3 View Faults
This option displays the panel fault status. This is the same display as the normal alphanumeric display without the logo.
The operator may scroll through all the faults using the [<] [>] keys.
Exit this menu by pressing the [No] key.
4.4.4.4 View Outputs
This option displays information on the outputs.
Using the Alarm Silence Key forces all NAC devices to an OFF condition.
4.4.4.5 View Disablements
This option displays information on disabled devices. Select 1) Zones to view disabled devices by zone. Select 2) Inputs
to view disabled input devices.
4.4.4.6 View System Events
This option displays information on system events. Use the [<] [>] keys to scroll through the events.
Copyright © 2001 Radionics
VIEW:
1) Device
4) Outputs
5) Disablements
Figure 19: View Menu
D8024 Operator's Guide
Page 19
National Security Systems (800)457-1999
http://www.nationalsecuritysystems.com
2) Log
3) Faults
6) Sys Events
D8024
Control Level 2
35394D
Advertisement
Table of Contents
