Adjustment (2Wd) - Stiga Park 2WD Workshop Manual

6.3.2 Adjustment (2WD)

In theory this machine can go just as fast both
forwards and backwards. It is therefore important
that the basic position of the hydrogear pedal is
correctly adjusted.
Procedure
1. Adjust the distance by moving the elbow
links on the control wire. See "Elbow links"
at page 3.
2. Release the upper nut on the stop screw
and screw down the screw a few turns.
WORKSHOP MANUAL
PARK
Chapter
6 - Control Wires
EDITION Page
7
2018