Transmission Oil And Filter Change Interval; Technical Specifications; General Tightening Torque; Instructions For Use - Stiga Park 2WD Workshop Manual

1.5 Transmission

1.5.1 Transmission oil and filter change interval

Below is listed oil and filter data for the transmissions.
Machine
Description Number
Park 2WD K46
Park Compact
K574G
and CH 4WD
KTM10M
without servo
Park CH 2WD
K57-V
with servo
Park CH 4WD
K574F
with servo
KTM10M
Park Pro 4WD KPL 10ALP
KTM10G
KTM10F
KTM-13

1.6 Technical specifications

1.6.1 General tightening torque

Unless otherwise stated, the following
tightening torque are applicable for screws and
nuts on the machine:
Tightening torques
Thread Torque
M5 5,7 Nm
M6 9,8 Nm
M8 24 Nm
M10 47 Nm

1.7 Instructions for use

Some procedures, e.g. changing engine oil,
engine filter etc., are refered to the owner´s
manual, delivered with the actual machine.
The owner´s manual can also be downloaded
from STIGA´s homepage. Go to www.STIGA.com
and click further to your actual language and
heading.
WORKSHOP MANUAL
PARK
Transmission
1137-0123-01
1137-0124-01
1134-6029-01
1137-0126-01
1137-0125-01
1134-6029-01
1134-5700-01
1134-5701-01
1134-5702-01
118475000/0
Chapter
1 - General instructions
Oil and filter change interval
1:st time Thereafter
- -
5 h 200 h
5 h 200 h
5 h 200 h
EDITION
2018
Oil volume Oil grade
- SAE 10W-30
(20W-50)
3,5 Liter Synthetic oil
5W-50
1,3 Liter Synthetic oil
5W-50
3,6 Liter Synthetic oil
5W-50
4,2 Liter
Synthetic oil
5W-50
4,7 Liter
Synthetic oil
5W-50
Page
14