Stiga Park 2WD Workshop Manual page 98

From 2008
Hide thumbs Also See for Park 2WD:
Table of Contents

Advertisement

Valid for (
Art. Number)
13-6141-XX
13-6142-XX
13-6178-15
13-6178-16
13-6185-XX
13-6189-XX
13-6197-XX
13-6198-55
Fault
The engine can be started
with the mower deck activated.
The engine can be started
without the brake pedal
pressed.
The engine does not stop
when the operator leaves the
seat and the mover deck is
activated.
The engine does not stop
The engine can be started
without the operator in the seat,
brake pedal pressed and deck
not activated.
Electric mower deck
adjustment does not work
The starter does not rotate and
there is no "click" heard at the
start attempt.
The starter does not rotate and
there is a "click" heard at the
start attempt.
The starter rotate, but the
engine does not start.
The battery runs repeatedly
empty.
WORKSHOP MANUAL
PARK
13-6175-26
13-6182-14
13-6193-XX
13-6311-XX
Cause/Alternative
The engine can be stopped with
the ignition key.
Works in one direction only.
Works not in any direction.
Fault in the safety circuits.
Faulty start engine or start relay
A connected voltmeter to the
battery shows a higher voltage at
high speed than if the engine not is
running.
No voltage different.
Chapter
7 - Electrical System
1005-0080
13-6176-16
13-6177-XX
13-6182-15
13-6184-XX
13-6195-14
13-6196-25
13-6313-11
13-6314-11
Action
Adjust or replace the mover deck switch.
Replace/adjust the pedal switch.
1. Adjust or replace the grey seat switch
2. Adjust/replace the mover deck switch.
1. Check the white cable and its
connection to the engine.
2. Replace the ignition switch.
Adjust/replace the black seat switch.
Replace the height adjustmen switch.
1. Check the contact.
2. Check the cables.
3. Check the motor by connecting an
additional battery to the deck cable.
4. Replace the switch.
1. Adjust/replace the pedal switch.
2. Adjust/replace the black seat switch.
3. Adjust/replace the mover deck switch.
4. Replace the ignition switch
1. Check cable connections.
2. Replace the start relay.
3. Replace the start motor
1. Check the fuel supply.
2. Check the engine according to
3. Check that the white short circuit cable
4. Replace the ignition switch.
5. Replace the shut off valve.
Replace the battery.
1. Check engine socket connections.
2. Replace the ignition switch.
3. Replace the voltage regulator.
4. Replace the alternator.
EDITION
2018
... until 2014
13-6311-11
13-6375-11
13-6374-11
the engine manual.
is not connected to earth.
Page
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Park compactPark ch 4wdPark ch 2wdPark pro 4wd

Table of Contents