Stiga Park 2WD Workshop Manual page 124

Fault
Electric mower deck
adjustment does not work
The The PTO clutch does not
engage
The sand spreader does not
work
WORKSHOP MANUAL
PARK
Cause/Alternative
Works in one direction only.
Works not in any direction.
The speed cruiser is also out of
function.
The clutch engages, but do not
remain engaged.
The LED in the switch lit when
engagement attempt is done.
Other alternative.
The LED in the switch lit when
engagement attempt is done.
The LED in the switch does not lit
when engagement attempt is
done.
Chapter
7 - Electrical System
Action
Replace the height adjustmen switch.
1. Check the contact.
2. Check the cables.
3. Check the motor by connecting an
additional battery to the deck cable.
4. Replace the switch.
Replace/adjust the seat switch.
Replace/adjust the clutch switch.
1. Check the clutch cables.
2. Replace the clutch.
1. Replace the relay.
2. Replace the clutch switch.
3. Replace the hydraulic lift switch (if
any).
1. Check/replace the fuse in the sand
spreader.
2. Check the cables and connectors.
3. Replace the sand spreader motor.
Replace the sand spreader switch.
EDITION Page
36
2018
... until 2014