Chassis And Body - Stiga Park 2WD Workshop Manual

Contents in this chapter
2.1 Rear wheel ........................................ 2
2.1.1 Assembly ....................................... 2
2.2 Lubrication chassis .......................... 3
2.3 Hydraulic pump ................................ 4
2.3.1 Dismantling .................................... 4
2.3.2 Assembly ....................................... 6
General
To facilitate the driving, handling of work equipment and to make it comfortable for the
driver, the machines are equipped with a various number of aid equipments. These
equipments are mainly the same for all the machines covered by this manual, but in some
cases configurated in different ways. Where divergences occour between the machines,
particular instructions are given for each particular equipment.
This chapter gives a brief description of the equipments and describes their repair and
replacements.
WORKSHOP MANUAL
PARK

2 Chassis and body

Chapter
2 - Chassis and body
EDITION Page
1
2018