WORKSHOP MANUAL
8.3.1 Rear transmission unit filter replacement
NOTE Draining the oil is facilitated if it is carried out before it cools down completely.
1. Place a container under the rear transmission
unit and drain all the oil by unscrewing the filter
cap.
Only for Park 4WD:
Unscrew the two drain plugs (2) and (3).
2. Remove the filter (4) grabbing it by the spring
(5).
3. Let all the oil flow into the container.
4. Fit the new filter (6) pushing it fully into its
housing.
PARK
8.3 MAINTENANCE OF THE HYDRAULIC SYSTEM
Chapter
8 - HYDRAULIC SYSTEM
NOTEThe oil must be drained with the by-pass
open and the cap of the oil tank unscrewed.
1
3
EDITION
PAGE
2020
94 /
124
2
4
5
6