Test Mode 10 (Led/Lcd Test) - Panasonic UF-E1 Service Manual

UF-E1

5.10. Test Mode 10 (LED/LCD Test)

This test mode is used to check the LEDs, LCD and CCD.
Use the following procedure.
Step
1 Standby.
2 Press "FUNCTION".
3 Press "#", " ", "#", "#".
4 Press "10" and "START".
1) Press "START" to light all LED LCD.
2) Press "START" to turn off LED LCD.
3) Press "START" to display LCD 2.
5 Press "STOP" twice to return the unit to standby.
Operation or Unit Condition
12-MAY 15:00
DEFERRED XMT?
TEST MODE
LCD&LED TEST
2222222222222222
12-MAY 15:00
116
LCD Display