UF-E1
4.5.3.
Document Jam (030) or Skewing
START
Is the Panel Cover Assembly
closed?
Yes
Does the sensor on the PNL
PCB operate normal?
Yes
Does the Feed Roller have drive
and sufficient friction?
Yes
Is the document path clear of
foreign particles or paper?
Yes
Is the Transmittingmechanism
operatingproperly?
Yes
END
No
Close the Panel Cover Assembly
firmly.
No
Clean or replace the PNL PCB.
No
Clean the surface of the roller
with isopropyl alcohol.
No
Remove the foreign particles or
paper from the document path.
No
Adjust or replace any defective
parts.
82