Functions And Features - Panasonic UF-E1 Service Manual

UF-E1
6.3.

Functions and Features

6.3.1 Automatic Switching Mode
There are 3 different automatic switching modes available TEL, : Fax/Tel, and Fax/Built-in TAM.
These modes are used for a single telephone line that shares fax and voice.
1. Tel Mode
This mode is used for answering calls by telephone handset, not by fax.
2. Fax / Tel Automatic Switching Mode
This mode is used if the unit is connected on a telephone line which receives both fax and voice calls
without a TAM connected.
3. Fax / Built-In TAM Automatic Switching Mode
This mode is used for the Built-in TAM when OUT mode is selected.
Mode Selection
The operation mode can be selected using a combination of the IN/OUT keys on the control panel and Fax
Parameters.
FAX SETTING
(1) Fax / Tel Automatic Switching Mode
This mode is used for a single telephone line that is shared for Fax and Voice. When the Fax answers the
incoming call, it sends a psuedo (false) ring-back tone to the caller or sends OGM1, OGM2. During this
time, it monitors whether the call is from another Fax unit (Detecting CNG signal). If it is a Fax call, the unit
automatically begins receiving the document. If it determines it is a Voice call, the unit will start ringing for
the operator's attention.
Selecting IN/OUT key
IN MODE
(LED is OFF.)
No 04
Selecting IN/OUT key
OUT MODE
(LED is ON)
No 05
Selecting Basic Setting
RCV MODE (IN)
TEL Mode
MANUAL RCV
FAX / TEL Auto Switch Mode
FAX/TEL
FAX/BUILT-IN TAM Mode
Fax Mode
140
Display
: MANUAL RCV
: FAX/TEL