Panasonic UF-E1 Service Manual page 155

6.3.5 Remote Control Feature
1. This function permits the retrieval of recorded messages by sending remote commands from the
remote location to the UF-E1.
Note that this function will only work with touch tone dialing from either a fax machine or a telephone.
The procedure for the Remote Control feature is illustrated below and the Remote Control Codes are
indicated on in below.
2. Basic Procedure
Fax or telephone of a
remote location
3. Remote Control Code Table
Function Name
Skip Message (I<<)
Playback Message
Skip Message (>>I)
Erase All Messages
Call
TAM OGM
#
Remote Control Password
Wrong Password
#
Wrong Password
#
Correct Password
#
Remote Code
Recorded Message
Command Code Sub. Code
1
2#
3
6#
UF-E1
Unit will switch to Fax Reception
mode after a 10 seconds time out
is elapsed.
If a wrong Password is received, it
will wait for a correct Password.
After receiving 3 successive
incorrect Passwords, the line is
disconeccted.
If the Remote Code is not
received within the 10 seconds
time out, the line is disconnected.
Playback ICM
- Skip to the beginning of the previous message.
- Plays back from the first message.
- Skips to the beginning of the next message.
- Erases all the recorded messages.
151
Function
UF-E1