Panasonic UF-E1 Service Manual page 194

UF-E1
6.8.3. Cap and Wiper Replacement
Removal
1. Move the carriage away from the service station. This may require rotating the bottom gear on the ser-
vice station to release the carriage lock (see Figure 6.12.2).
Figure 6.12.2. Service station viewed from the bottom showing the gear which releases the carriage lock
Figure 6.12.3. Service station (viewed from the top) showing the direction to push the cap/ wiper rotating
2. Rotate the rotary service assembly by pushing the cap and wipers counterclockwise until the desired
cap or wiper is at the top of the assembly (see Figure 6.12.3 above).
3. To replace either the monochrome or color cap, hold the rotary service assembly stationary and simply
lift the cap straight up off the cap mount. To replace the cap, push the new cap onto the cap mount,
making sure it is mounted evenly and NOT twisted. Make sure the cap is fully seated against the bot-
tom of the cap mount.
Rotate gear to
release
carriage lock
Wiper
assembly
190
Cap