Panasonic UF-E1 Service Manual page 77

4.3.12. Information Code: 016 (Carriage Cannot Move)
START
Is the recording paper path clear
or are there no foreign objects in
the carriage path?
Yes
Is the Cartridge Cradle movable
by hand?
Yes
Is the Encoder Strip clean?
Yes
Is there a pulse output (+5V)
on CN55, pin28 and pin30 of
PENC PCB?
Yes
Is there a pulse output (+19V)
on CN52, pin1 and pin2 of PENC
PCB?
Yes
Replace the Carriage Motor.
END
No
Remove the jammed paper or the
foreign objects
No
1.Replace the Carriage Rod.
2.Replace the Carriage Assembly.
No
Clean the Encoder Strip with a
soft cloth, soaked with water.
No
Replace the Encoder Strip.
No
Replace the PENC PCB.
73
UF-E1