Table of Contents
Advertisement
SCPI Commands Overview
Command (Link to detailed description)
":<Handle>:EDIT:SEGMent(*):PATTern:LENGth?" on page 112
":<Handle>:EDIT:SEGMent(*):PATTern:WIDTh?" on page 112
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:COPY" on page 113
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:PASTE" on page 113
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:FILL" on page 114
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:INVert" on page 115
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:MIRRor" on page 116
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:INSert" on page 117
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:DELete" on page 117
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:CONVerse" on
page 118
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:SERialize" on page 119 Serializes a parallel data stream.
":<Handle>:EDIT:SEGMent(*):PATTern:MODify:DESerialize" on
page 120
":<Handle>:EDIT:SEGMent(*):PARAmeter:LENGth?" on page 120
":<Handle>:EDIT:SEGMent(*):PARAmeter:LIST?" on page 121
":<Handle>:EDIT:SEGMent(*):PARAmeter[:VALue]?" on page 121
":<Handle>:EDIT:SEGMent(*):PARAmeter[:VALue]" on page 122
":<Handle>:EDIT:SEGMent(*):PARAmeter:REMove" on page 122
":<Handle>:EDIT:SEGMent(*):TYPE" on page 122
":<Handle>:EDIT:SEGMent(*):TYPE?" on page 123
Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Overview of the SCPI Command Structure
Description
Returns the numbers of vectors of a segment.
Returns the numbers of traces of a segment.
Copies the bounded rectangle of data from the segment into the
clipboard.
Pastes the data currently stored in the clipboard to the specified
segment.
Sets the bounded area of the segment with the same state value.
Inverts the states information in the bounded area.
Rotates the specified block about horizontal (VECTor) or vertical
axis (TRACe).
Inserts new traces or vectors into a segment.
Deletes traces or vectors from a segment.
Changes the current coding for the segment and converts exist-
ing data in the segment according to the specified mapping
Deserializes a serial data stream.
Gets the length of the list of parameters available for this seg-
ment.
Gets the list of parameters available for this segment.
Returns the value for a specified parameter from the segment.
Sets the value for a specified parameter in the segment.
Removes a parameter from the list of parameters in the segment.
Sets the segment type for the current segment.
Returns the segment type of the segment specified by the seg-
ment inspector index number.
47
Advertisement
Table of Contents
